Analog Devices: New Product Alert
0.5 dB LSB, 6-Bit, Silicon Digital Attenuator, 9 kHz to 40 GHz
The ADRF5720 is a silicon, 6-bit digital attenuator with 31.5 dB attenuation control range in 0.5 dB steps. This device operates from 9 kHz to 40 GHz with better than 4.5 dB of insertion loss and excellent attenuation accuracy. The ATTIN port of the ADRF5720 has a radio frequency (RF) input power handling capability of 27 dBm average and 30 dBm peak for all states.
Key Features
► Ultrawideband frequency range: 9 kHz to 40 GHz
► Attenuation range: 0.5 dB steps to 31.5 dB
► Low insertion loss with impedance match
Applications
► Industrial scanners
► Test and instrumentation
► Cellular infrastructure: 5G millimeter wave
24 GHz, ISM Band, Multichannel FMCW Radar Transmitter
The ADF5902 is a 24 GHz transmitter (Tx) monolithic microwave integrated circuit (MMIC) with an on-chip, 24 GHz voltage controlled oscillator (VCO). The VCO features a fractional-N frequency synthesizer with waveform generation capability with programmable grid array (PGA) and dual transmitter channels for radar systems.
Key Features
► 24 GHz to 24.25 GHz VCO (industrial, scientific, and medical (ISM) radio band)
► 2-channel 24 GHz power amplifier with 8 dBm output
► Single-ended outputs 2-channel muxed outputs with mute function
Applications
► Automotive radars
► Industrial radars
► Microwave radar sensors
26.5 GHz, Integer N/Fractional-N, PLL Synthesizer
The ADF41513 is an ultralow noise frequency synthesizer that can be used to implement local oscillators (LOs) as high as 26.5 GHz in the upconversion and downconversion sections of wireless receivers and transmitters. It is designed on a high performance silicon geranium (SiGe), bipolar complementary metal-oxide semiconductor (BiCMOS) process, and it achieves a normalized phase noise floor of −235 dBc/Hz.
Key Features
► 1 GHz to 26.5 GHz bandwidth
► Ultralow noise PLL
► Integer N = −235 dBc/Hz, fractional-N = −231 dBc/Hz
Applications
► Test equipment and instrumentation
► Wireless infrastructure
► Microwave point-to-point and multipoint radios
Dual, 11-/16-Bit, 12.6 GSPS, RF DAC with Wideband Channelizers
The AD9175 is a high performance, dual, 16-bit digital-to-analog converter (DAC) that supports DAC sample rates up to 12.6 GSPS. The device features an 8-lane, 15.4 Gbps JESD204B data input port, a high performance, on-chip DAC clock multiplier, and digital signal processing capabilities targeted at single-band and multiband direct to radio frequency wireless applications.
Key Features
► Supports multiband wireless applications
► Proprietary, low spurious and distortion design
► Flexible 8-lane, 15.4 Gbps JESD204B interface
Applications
► Wireless communications infrastructure
- Multiband base station radios
- Microwave/E-band backhaul systems
► Instrumentation, automatic test equipment (ATE)
► Radars and jammers
Dual, Simultaneous Sampling, 14‑Bit SAR ADC, Differential Inputs
The AD7381 is a 14‑bit, pin-compatible, dual simultaneous sampling, high speed, low power, successive approximation register (SAR) analog-to-digital converter (ADC) that operates from a 3.0 V to 3.6 V power supply and features throughput rates up to 4 MSPS. The analog input type is differential, accepts a wide common-mode input voltage, and is sampled and converted on the falling edge of CS.
Key Features
► 14-bit ADC
► Dual simultaneous sampling
► Fully differential analog inputs
Applications
► Motor control position feedback
► Motor control current sense
► Sonar power quality
6‑Channel, 14‑Bit, Current Output DAC with On-Chip Reference, SPI Interface
The AD5770R is a 6‑channel, 14‑bit resolution, low noise, programmable current output, digital-to-analog converter for photonics control applications. The device incorporates a 1.25 V, on-chip voltage reference, a 2.5 kΩ precision resistor for reference current generation, die temperature, output monitoring functions, a fault alarm, and reset functions.
Key Features
► 6-channel, current output DAC
► 14-bit resolution Programmable output current ranges
- Channel 0: 0 mA to 300 mA, −60 mA to +300 mA, −60 mA to 0 mA
- Channel 1: 0 mA to 140 mA, 0 mA to 250 mA
- Channel 2: 0 mA to 55 mA, 0 mA to 150 mA
- Channel 3, Channel 4, Channel 5: 0 mA to 45 mA, 0 mA to 100 mA
- All current sourcing output ranges scale back by up to 0.5×
Applications
► Photonics control
► LED driver programmable current source
► Current mode biasing
3-Channel, Isolated Micropower Management Unit with Seven Digital Isolators
The ADP1031 is a high performance, isolated micropower management unit (PMU) that combines an isolated flyback dc-to-dc regulator, an inverting dc-to-dc regulator, and a buck dc-to-dc regulator, providing three isolated power rails. Additionally, the ADP1031 contains four, high speed, serial peripheral interface (SPI) isolation channels and three general-purpose isolators for channel-to-channel applications where low power dissipation and a small solution size are required.
Key Features
► Wide input supply voltage range: 4.5 V to 60 V
► Integrated flyback power
► Generates isolated, independent bipolar outputs and factory programmable buck output
- VOUT1: 21 V, 24 V, or 6 V to 28 V
- VOUT2: 5.15 V, 5.0 V, or 3.3 V
- VOUT3: −24 V to −5 V
Applications
► Industrial automation and process control
► Instrumentation and data acquisition systems
► Data and power isolation
65 A+ Power/Energy Monitor with Integrated Sense Resistor
The LTC2947-65 is a high precision power and energy monitor with an internal sense resistor supporting up to ±65 A. Three internal No Latency ΔΣ™ ADCs ensure accurate measurement of voltage and current, while high bandwidth analog multiplication of voltage and current provides accurate power measurement in a wide range of applications. Internal or external clocking options enable precise charge and energy measurements.
Key Features
► Measures current, voltage, power, charge, energy
► ±65 A current range with low 18 mA offset
► Integrated 150 μΩ sense resistor
Applications
► Servers
► Telecom infrastructure
► Industrial
► Electric vehicles
► Photovoltaics
