To help personalise content, tailor your experience and help us improve our services, uses cookies.
By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy.

New Semiconductor’s Destiny with Growing Silicon’s Age

fabricated device

Probing a newly fabricated device. Credit: Corey Shemelya and Tom Vandervelde, Tufts University, CC BY-ND


No matter what technology is one using today – it’s a known fact that semiconductor comes into the picture. You may well think of a connected life today and go beyond enjoin your garage from a distant. It’s all possible because of high-end circuits and sensors which are imbibed with semiconductors.  But like every technology semiconductor is also undergoing technology advancements and rapid evolutions, especially on its material and reliability side.

Semiconductor has been interpreted with silicon which broadly made United States tech hub to go after this wizard material name ‘Silicon Valley’.

But with new materials keeping silicon on verge the affluent silicon has overtaken because of its traditional benefits and engineers look to use electronic devices for producing or processing light.

The search is on – is there a replacement for the silicon or the material will scale up with promising power craving technologies.

What’s a semiconductor?

As the name suggests, semiconductors are materials that conduct electricity at some temperatures but not others – unlike most metals, which are conductive at any temperature, and insulators like glass, plastic and stone, which usually don’t conduct electricity.

However, this is not their most important trait. When constructed properly, these materials can modify the electricity moving through them, including limiting the directions it flows and amplifying a signal.

The combination of these properties is the basis of diodes and transistors which make up all our modern gadgets. These circuit elements perform a multitude of tasks, including converting the electricity from your wall socket to something usable by the devices, and processing information in the form of zeros and ones.

Light can also be absorbed into semiconductors and turned into electrical current and voltage. The process works in reverse as well, allowing for the emission of light. Using this property, we make lasers, LED lights, digital cameras and many other devices.

chip fabricated

A semiconductor chip fabricated in a Tufts University lab. Credit: Corey Shemelya and Tom Vandervelde, Tufts University, CC BY-ND


The rise of silicon

While this all seems very modern, the original discoveries of semiconductors date back to the 1830s. By the 1880s, Alexander Graham Bell experimented with using selenium to transmit sound over a beam of light. Selenium was also used to make some of the first solar cells in the 1880s.

A key limitation was the inability to purify the elements being used. Tiny impurities – as small as one in a trillion, or 0.0000000001 percent – could fundamentally change the way a semiconductor behaved. As technology evolved to make purer materials, better semiconductors followed.

The first semiconducting transistor was made of germanium in 1948, but silicon quickly rose to become the dominant semiconductor material. Silicon is mechanically strong, relatively easy to purify, and has reasonable electrical properties.

It is also incredibly abundant: 28.2 percent of the Earth’s crust is silicon. That makes it literally dirt cheap. This almost-perfect semiconductor worked well for making diodes and transistors and still is the basis of almost every computer chip out there. There was one problem: silicon is very inefficient at converting light into an electrical signal, or turning electricity back into light.

scanning electron

Ghosts in the machine: A scanning electron microscopy image of a damaged gallium-antimonide semiconductor sample. Credit: Corey Shemelya and Tom Vandervelde, Tufts University, CC BY-ND


When the primary use of semiconductors was in computer processors connected by metal wires, this wasn’t much of a problem. But, as we moved toward using semiconductors in solar panels, camera sensors and other light-related applications, this weakness of silicon became a real obstacle to progress.

Finding new semiconductors

The search for new semiconductors begins on the periodic table of the elements, a portion of which is in the figure at right.

In the column labeled IV, each element forms bonds by sharing four of its electrons with four neighbors. The strongest of these “group IV” elements bonds is for carbon (C), forming diamonds. Diamonds are good insulators (and transparent) because carbon holds on to these electrons so tightly. Generally, a diamond would burn before you could force an electrical current through it.

However, the III-V materials’ increased electron speeds enable construction of much faster transistors, with speeds hundreds of times faster than the ones you find in your computers. They may pave the way for wires inside computers to be replaced with beams of light, significantly improving the speed of data flow.

In addition to III-V materials, there are also II-VI materials in use. These materials include some of the sulfides and oxides researched in the 1800s. Combinations of zinc, cadmium, and mercury with tellurium have been used to create infrared cameras as well as solar cells from companies such as First Solar. These materials are notoriously brittle and very challenging to fabricate.

The future of semiconductors

How might new semiconductor materials be used?

High power III-V (gallium-nitride) semiconductor electronics will be the backbone of our electrical grid system, converting power for high voltage transmission and back again. New III-V materials (antimonides and bismuthides) are leading the way for infrared sensing for medical, military, other civilian uses, as well new telecommunication possibilities. Earth-abundant element combinations are being explored to make new semiconductors for high-efficiency, but inexpensive, solar cells.

And what of the old standby, silicon? Its inability to harness light efficiently does not mean that it is destined for the dust bin of history? Researchers are giving new life to silicon, creating “silicon photonics” to better handle light, rather than just shuttling electrons.

One method is the inclusion of small amounts of another group IV element, tin, into silicon or germanium. That changes their properties, allowing them to absorb and emit light more efficiently.

The act of including that tin turns out to be difficult, like many other challenges in material science. But as I tell my students all the time, “if it were easy, then it would not be research.”


Show More

Related Articles

Check Also