To help personalise content, tailor your experience and help us improve our services, Bisinfotech.com uses cookies.
By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy.

Electronic Components to be Printed Like Newspapers in Future

Purdue University researchers have come up with a low-cost process combined tools already used in industry for manufacturing metals on a large scale but used the speed and precision of roll-to-roll newspaper printing to remove a couple of fabrication barriers in making electronics faster than they are today.

The electronic innovation has been redefined with a new manufacturing technique that uses a process similar to newspaper printing to form smoother and more flexible metals for making ultrafast electronic devices.

Purdue University researchers have come up with a low-cost process combined tools already used in industry for manufacturing metals on a large scale but used the speed and precision of roll-to-roll newspaper printing to remove a couple of fabrication barriers in making electronics faster than they are today.

Cellphones, laptops, tablets, and many other electronics rely on their internal metallic circuits to process information at high speed. Current metal fabrication techniques tend to make these circuits by getting a thin rain of liquid metal drops to pass through a stencil mask in the shape of a circuit, kind of like spraying graffiti on walls.

“Unfortunately, this fabrication technique generates metallic circuits with rough surfaces, causing our electronic devices to heat up and drain their batteries faster,” said Ramses Martinez, Assistant Professor of Industrial Engineering and Biomedical Engineering

Electronic Components
Roll-to-roll laser-induced superplasticity, a new fabrication method, prints metals at the nanoscale needed for making electronic devices ultrafast. (Purdue University image/Ramses Martinez)

 

Further, future ultrafast devices also will require much smaller metal components, which calls for a higher resolution to make them at these nanoscale sizes.

“Forming metals with increasingly smaller shapes requires molds with higher and higher definition until you reach the nanoscale size,” added Martinez. “Adding the latest advances in nanotechnology requires us to pattern metals in sizes that are even smaller than the grains they are made of. It’s like making a sand castle smaller than a grain of sand.”

This so-called “formability limit” hampers the ability to manufacture materials with nanoscale resolution at high speed.

The Purdue researchers have addressed both of these issues – roughness and low resolution – with a new large-scale fabrication method that enables the forming of smooth metallic circuits at the nanoscale using conventional carbon dioxide lasers, which are already common for industrial cutting and engraving.

“Printing tiny metal components like newspapers makes them much smoother. This allows an electric current to travel better with less risk of overheating,” Martinez said.

The fabrication method, called roll-to-roll laser-induced superplasticity, uses a rolling stamp like the ones used to print newspapers at high speed. The technique can induce, for a brief period of time, “superelastic” behavior to different metals by applying high-energy laser shots, which enables the metal to flow into the nanoscale features of the rolling stamp – circumventing the formability limit.

“In the future, the roll-to-roll fabrication of devices using our technique could enable the creation of touch screens covered with nanostructures capable of interacting with light and generating 3D images, as well as the cost-effective fabrication of more sensitive biosensors,” commented Martinez.

Tags
Show More

Jyoti Gazmer

A Mass Comm. graduate believes strongly in the power of words. A book lover who dreams to own a library some day. An introvert but will become your closest friend if you share mutual feelings about COFFEE. I prefer having more puppies over humans.

Related Articles