To help personalise content, tailor your experience and help us improve our services, Bisinfotech.com uses cookies.
By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy.

Samsung Ground Breaks on Multi-Pixel LEDs

Samsung Electronics has developed various lighting modules concepts during electronica. Samsung Electronics with its new innovative range of multi-pixel LEDS said, Matrix Beam Module was based on a regular surface mount LED assembly.

Hence, it touts to create a 6×16 array of white LEDs together with switch ICs and a LED driver module.

Another implementation consisted of a single 4.8×19.2mm LED die forming an array of 192 (6×32) individual pixels (sized at 550x690um), each embedded into a silicon recess forming reflector walls.

The large LEDs were built on Samsung’s 8″ wafers and the individual pixels were obtained through a cavity-filling phosphor deposition process, according to eeNews Europe reports.

Here the reflective silicon walls allow for a higher contrast ratio compared to conventional micro-LED arrays (up to 500:1), with an extremely narrow dark-spacing (only 20um of spacing between two adjacent pixels).

The silicon walls act as micro collimators and remove the need for one of the most sophisticated part in adaptive headlamp design. Collimators are expensive to manufacture and require precision assembly, here the silicon walls control the beam shape at the source.

Depending on customer demand, the aspect ratio of the die could be specified differently for mass production, with integrated drivers if needed. The 4.8×19.2mm die would have a luminous flux of 3800lm at 1.6A, drawing 54W. Samsung hopes to have such pixel lighting modules for the market by 2019 or 2020. The company’s roadmap anticipates that by 2023, it could deliver 20,000 pixels LED chips in 70×280 arrays measuring just 3.1×12.5mm (with an individual pixel size of 45x45um).

For further info: Click here

Tags
Show More

Related Articles