By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy.

Rohde & Schwarz to Showcase Test Solution at EMV 2020

Rohde & SchwarzAt EMV 2020 in Cologne (Germany), Rohde & Schwarz will present EMC test solutions specifically for users in the automotive industry: the fastest CISPR-25 certification, a robust and compact BCI test system, and R&S AdVISE version 5, which keeps a close eye even on vibrating display elements during EMS tests.

Under the slogan “Accelerate Design. Maximize Performance.”, Rohde & Schwarz will present its comprehensive portfolio of EMC test and measurement equipment at EMV 2020 in Cologne on March 17-19, 2020. At Booth 112 in Hall 10.2, Rohde & Schwarz will focus among others on test solutions for the automotive industry.

Fastest CISPR-25 acceptance

One of the things manufacturers have to ensure is that onboard receivers in vehicles are adequately protected against electromagnetic interference. Rohde & Schwarz has developed an especially fast measurement method for tests that meet the CISPR-25 standard. Not only does it measure very quickly, it does so with an extremely small resolution bandwidth of 9 kHz.

The demo at the booth is based on the R&S ESR EMI test receiver with the R&S ESH3-Z6 line impedance stabilization network. With its numerous features for analysis and troubleshooting, the R&S ESR is ideal as a midrange compliance test receiver.

Rohde & Schwarz is also exhibiting the new fast time-domain scan (fast TDS) function for the R&S ESW high-end test receiver. With double the scan bandwidth, the measurement speed is nearly twice as fast as a conventional time-domain scan.

This enables faster measurements than ever previously achieved commercially for time-consuming tests with a quasi-peak detector. Along with accelerating preliminary measurements, this method can be used for certification in the frequency range above 300 MHz. Fast TDS is available at no cost with the next firmware version for the R&S ESW.

Robust, compact BCI test system

There is also a robust, compact test system for wired electromagnetic susceptibility measurements using the bulk current injection (BCI) test method, as prescribed for testing electronic modules in vehicles. The BCI system consists of the compact R&S SMC100A signal generator, the robust R&S BBA150-AB broadband amplifier with output power up to 350 W in the frequency range from 4 kHz to 400 MHz, the R&S NRP6AN average power sensor specifically developed for EMC applications, and the widely used R&S EMC32 measurement software.

Tags

Nitisha Dubey

I am a Journalist with a post graduate degree in Journalism & Mass Communication. I love reading non-fiction books, exploring different destinations and varieties of cuisines. Biographies and historical movies are few favourites.

Related Articles