ROHM has unveiled the new automotive LDO regulator ICs with stable operation at nanoscale output capacitance. The BD9xxN1 series (BD950N1G-C, BD933N1G-C, BD900N1G-C, BD950N1WG-C, BD933N1WG-C, BD900N1WG-C) is optimized for primary (direct connection to 12V) power supplies in a wide range of applications, including powertrain, body, ADAS, and car infotainment.
In recent years, the continuing digitization of all types of equipment has been increasing the number of electronic components, which in turn has been driving the demand to reduce the number of capacitors used for circuit stabilization to shrink both the size and the bill of material (BOM).
This requires power supply ICs in power supply circuits that can achieve stable operation with small-sized capacitors, but until now it had been difficult to achieve stable operation in applications with output capacitances of 1μF or less.
To meet these needs, ROHM developed the Nano CapTM ultra-stable control technology for power supply ICs in 2020. Leveraging this technology enables ROHM designers to develop LDO regulators that ensure stable operation even at ultra-small nanoscale output capacitances.
This enables the support of an output capacitance of 100nF – less than 1/10 of the value of standard products – ensuring stable operation required by applications (output voltage variation within 100mV: condition is 1mA ⇔ 50mA/1μs load current variation), even when the input voltage and load current fluctuate.
Furthermore, in addition to common μF-order MLCCs (Multi-Layer Ceramic Capacitors) and large capacitance electrolytic capacitors, ROHM’s new regulators can handle an ultra-wide range of output capacitances down to 1μF or less in the ultra-compact 0603/0402 size (which in the past had not been stable enough to be used), contributing not only to the miniaturization of components and boards but also to a reduction of design resources needed by supporting a wider range of capacitor conditions.
Going forward, ROHM is expanding the LDO regulator series with built-in Nano CapTM technology to 22 models in different output voltages and packages by the end of FY2022. In 2023, another 24 models will be added to support 500mA output current, for a total of 46 products by the end of FY2023, covering an even broader range of applications.