By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy.

State of The Coating Industry with Phil Kinner, Global Business/Technical Director – Coatings Division at Electrolube

Phil KinnerNiloy from BIsinfotech in talks with Phil Kinner, Global Business and Technical Director of Electrolube’s Coatings Division, discuss the impact of 2020, the innovation of new materials, issues of growing importance to the electronics industry and how the future is looking right now. Phil also describes the increasing prominence of condensation resistance and environmental issues that specifically preclude the use of solvent-containing or solvent-emitting conformal coating materials.

Q It goes without saying that 2020 presented all kinds of challenges for people all over the world, how did the year impact on you?

2020 was certainly an interesting year; one that most of us will choose to forget. Plant shutdowns, project cancellations, component shortages, furlough, working from home, Microsoft teams, Brexit, the list of challenges seemingly endless. Fortunately, life continued largely unchanged for those of us in the R&D team at Electrolube and we were able to complete many of our longer-term projects without the usual day to day interruptions; after all, a win is a win!

Q As a result of the tremendous progress heralded by the vaccination programme, hope of a return to ‘normality’ is high. However, what does normality look like now, and looking ahead to the future?

Several trends have really stood out as the first half of 2021 comes to a close. Firstly, 150°C appears to have become the new ‘normal’ for the maximum required operating temperature of conformal coatings for automotive use. This is an increase from 85°C or 120°C on the last generation of products. This new high is really pushing the limits of availability from traditional coating chemistries, but happily for us, this is not a surprise. Here at Electrolube, we have been preparing for this very moment over the last few years; applying ourselves to the generation of solutions and products that support the new requirements.

Q We have been reading about your extensive work in condensation testing. What is the reason for this?

Condensation resistance continues to grow in importance, increasing in prominence within many new customer specifications. Historically, conformal coatings have predominantly applied to provide a barrier against the effects of humidity affecting the underlying circuit. This is not nearly as challenging a scenario as a condensing environment, where the presence of liquid water provides new tests, both to the thickness and coverage achievable. Liquid water will seek out any weak spots in the protection afforded and corrosion takes place much more quickly if this is present. Liquid water can also change the electrical properties of many coatings, causing them to become less insulating than expected, and leading to leakage currents and other unexpected electrical behaviours that result in faulty performance of the assembly. We have witnessed many cases of late whereupon companies performing condensation testing of powered assemblies, coated with historical materials and processes fail very rapidly, as predicted by the NPL’s recent industry project. Thankfully, there are materials and processes available that can maintain operation and prevent corrosion and failure events under condensing conditions.

Q What key issues face the industry moving forwards?

Environmental issues have really been in the spotlight over the past twelve months as pollution levels have dropped in many areas due to various lockdowns despite huge ice sheet breakages and raging wildfires. Throughout the world, governments have pledged commitments to a variety of agreements aiming to reduce greenhouse gases and minimize climate change. For example, this year China has effectively banned the use of certain solvents used in many legacy coating formulations, and heavily restricted the use of solvents in general coatings applications. Whilst conformal coatings are currently exempt from this legislation, it is not hard to imagine that they will be targeted in further legislation or perhaps even the next revision. This has had a knock-on effect with the environmental aspect of Corporate Social Responsibility starting to become more apparent at the material specification level too. For the first time throughout my 22 years in the conformal coating industry, I have seen several specifications that specifically preclude the use of solvent-containing or solvent-emitting conformal coating materials. This is not only a great step forward for the environment, but a great step forward for the material users as well. Solvent-free alternative materials are generally higher performing in condensing environments and can have the ability to meet the requirements of the increased maximum thermal operating temperatures.

Also, the IPC-CC-830 conformal coating standard committee are currently looking to introduce several new classes of coating materials. This reflects the newer types of products, introduced to help meet some of these new industry requirements. However, since the pass/fail criteria remains the same for materials from different classes, users will still be required to ensure that the materials are fit for purpose and meet their requirements.

Electrolube remain committed to providing conformal coating solutions to meet current challenges but also pay attention to future requirements. The novel, high-performance, solvent-free 2K range of conformal coatings, initially introduced some 5 years ago, is finding commercial success in many applications. Improved environmental credentials, because of the solvent-free nature and lack of by-products from curing, sit happily alongside improved condensation resistance and are the hallmarks of the 2K range.

Q What does the near future hold in store?

I am really looking forward to the resumption of live and in-person events where I can talk about conformal coating solutions and solving customers’ challenges and issues with them. I’m also really excited about the product launches we will be making later in the year, as well as unleashing future innovations from our R&D pipeline. Finally, I am really looking forward to our integration journey into MacDermid Alpha Electronics Solutions and the benefits that will see continued investment and the opportunity to work with a much larger global team. 2021 is shaping up to be a very exciting year personally, professionally and for the industry in general.


BiS Team

BIS Infotech is a vivid one stop online source protracting all the exclusive affairs of the Consumer and Business Technology. We have well accomplished on delivering expert views, reviews, and stories empowering millions with impartial and nonpareil opinions. Technology has become an inexorable part of our daily lifestyle and with BIS Infotech expertise, millions of intriguers everyday are finding for itself a crony hangout zone.

Related Articles

Upcoming Events