By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy.

Texas Instruments Introduces Industry’s First Digital Isolator

Texas Instruments (TI)  has introduced the industry’s first digital isolator that is qualified to the Grade 0 ambient operating temperature specification of the Automotive Electronics Council (AEC)-Q100 standard.

TEXASThe ISO7741E-Q1 features an industry-leading 1.5-kVRMS working voltage and supports temperatures up to the Grade 0 maximum of 150°C.

The new isolator enables engineers to better protect low-voltage circuitry from high-voltage events in hybrid electric vehicle (HEV) and electric vehicle (EV) systems and avoid having to design in cooling systems to reduce temperatures to below 125°C – the maximum temperature Grade 1-qualified integrated circuits (ICs) can support.

In addition, when implementing Controller Area Network Flexible Data Rate (CAN FD) communications in system designs, engineers can increase in-vehicle network (IVN) signal protection and reach by using the ISO7741E-Q1 with the new TCAN1044EV-Q1 Grade 0 CAN FD transceiver.

High-temperature device operation increases design flexibility

Grade 0-qualified ICs meet the requirements of the AEC-Q100’s highest temperature grade (-40°C to 150°C) and are designed to help engineers simplify design of HEV/EV systems in harsh environments, such as 48-V HEVs where the co-existence of internal combustion engines and battery systems can heat the air around ICs beyond 125°C. With reliable performance up to 150°C, TI’s new Grade 0 devices, the ISO7741E-Q1 and the TCAN1044EV-Q1, can be placed in high-temperature areas of HEV/EV systems without increasing bill of materials or design complexity.

To learn more about AEC-Q100 automotive temperature grades and why Grade 0 matters for IVN signal isolation, read the technical article, “Solving high-temperature isolation design challenges with Grade 0 digital isolators.”

Highest isolation rating and high electromagnetic compatibility

The ISO7741E-Q1 uses TI’s capacitive isolation technology to provide the industry’s highest working voltage of 1.5 kVRMS and an isolation voltage of 5 kVRMS, enabling engineers to achieve more reliable operation of HEV/EV powertrain and HVAC systems that require signal transmission across an isolation barrier, such as starter generators, cooling fans and traction inverters.

This device provides additional system-level protection in harsh automotive environments due to its high typical common-mode transient immunity of ±100 kV/µs and a ±8-kV International Electrotechnical Commission (IEC) 61000-4-2 contact discharge protection.

Fast signal throughput for reliable IVN performance over longer distances

By combining the ISO7741E-Q1 and the TCAN1044EV-Q1 in CAN FD bus designs, engineers can meet the International Organization for Standardization (ISO) 11898-2:2016 timing standard for high-speed automotive communications, allowing for extended reach and reliability of signals across IVNs without diminishing data rates.

For more info, click here

Tags

Nitisha Dubey

I am a Journalist with a post graduate degree in Journalism & Mass Communication. I love reading non-fiction books, exploring different destinations and varieties of cuisines. Biographies and historical movies are few favourites.

Related Articles

Upcoming Events